Safety Instruction - Leibinger 22/4400-00 User Manual

Care and maintenance:
Unplug from the power supply before cleaning. Use a damp cloth for cleaning the Charger 22/4413-00, 22/4414-00 or 22/4411-00, 22/4412-00 and
BATTERY 22/4415-00; 22/4416-00.
Do not use cleaning agents. Make sure that the contacts of BATTERY 22/4415-00; 22/4416-00 are kept free of moisture. Similarly, protect the
charging compartment (3) of the Charger 22/4413-00, 22/4414-00 or 22/4411-00, 22/4412-00 against moisture. Never immerse in liquid or clean under
flowing water!
Repair:
LEIBINGER GmbH&Co.KG only accepts responsibility for the safety, reliability and performance of the Charger 22/4413-00, 22/4414-00 or 22/4411-00,
22/4412-00 and BATTERY 22/4415-00; 22/4416-00 if:
•
the Charger 22/4413-00, 22/4414-00 or 22/4411-00, 22/4412-00 and BATTERY 22/4415-00; 22/4416-00 are used in compliance with the instructions
in the User's Manual.
•
installation, additions, adjustments, modifications and repairs are carried out by LEIBINGER GmbH&Co.KG or by qualified persons ex-
pressly authorised by LEIBINGER GmbH&Co.KG.
Only original spare parts from LEIBINGER GmbH&Co.KG may be used for repairs.
The operator is required to obtain a list detailing the type and scope of work performed, with the company stamp, date and signature
of the repairer.
WARNING!
All equipment must be cleaned before sending for servicing!
Transport and storage conditions:
To prevent damage!
The Charger 22/4413-00, 22/4414-00 or 22/4411-00, 22/4412-00 and BATTERY 22/4415-00; 22/4416-00 must be transported in the aluminium case
provided, which has a special foam
insert. The same applies for correct storage of this device. This device must only be kept in a dry, closed place!

Safety instruction:

1. If any fault occurs
2. For transport or storage when not in use
3. Before sending for servicing
If, for any reason, the device is stored or transported differently, this may result in damage which is not covered by the manufacturer's
or dealer's warranty.
Transport and storage conditions:
Electromagnetic compatibility (EMC):
Manufacturer's certificate issued by LEIBINGER GmbH&Co.KG:
It is hereby certified that the Chargers 22/4413-00, 22/4414-00 or 22/4411-00, 22/4412-00 have been tested and are interference-suppressed in
compliance with the EMC provisions of EN60601-1-2:1993. These Chargers 22/4413-00, 22/4414-00 or 22/4411-00, 22/4412-00 have been tested in
compliance with EN60335-2-29/ A11:1998 and conform to Germany's equipment safety regulations (GSG) for placing into commerce.
13