Table of Contents
Advertisement
REMOTE CONTROL FUNCTION
1. POWER
2. FUNC
3. TIMER
4. AUTO
5. HI
6. MID
7. LOW
8. SLEEP
9. TEMP.
ON/OFF switch
Function "MODE" selector
Hourly programming
Automatic fan speed
High fan speed
Medium fan speed
Low fan speed
Night operation selector
Temperature selector
INSTALLATION
Install the portable air conditioner in a flat and spacious location where
the air inlets and outlets will not be blocked. A minimum clearance of
40cm from a wall or other obstacles should be kept (as pictured below ).
The appliance should not be used in the laundry.
NOTICE
For Reverse cycle Cooling / Heating models only. (GDC12RCWA /
GDC12RCBA / GDC14RCWA / GDC14RCBA)
This unit can evaporate the condensation and flow out through the
exhaust hose automatically when the unit is in the cooling function.
Contrarily when the unit is in heating function and the water level reaches
the detected level, it will begin to pump for sixty seconds. After sixty
seconds in the pump function, if the water level is still on the detected
level, the unit will stop working and present "E7" warning. Then after
three seconds of revealing error, the unit will rework automatically.
Please make sure the drain plug is fitted to the drain outlet before use
(10), and the exhaust and drain pipe is extended to the closest window
when the unit is running.
Hide quick links:
Advertisement
Table of Contents
