Functional Description - Makita HM1242C Instruction Manual

Hide thumbs Also See for HM1242C:

FUNCTIONAL DESCRIPTION

Bit

angle

The bit can be secured at

different angles. To change the bit angle, slide the change

ring forward, then turn the change ring to change the bit angle. At the desired angle, slide

the change ring back to the original position. The bit will be secured in place.

NOTE:

The change ring cannot turn when the bit is not installed on the tool.

Change ring

Side handle (auxiliary handle)

The side handle can be swung

3 6 0 '

on the

vertical and secured at any desired posi-

tion. It also secures at eight different posi-

tions back and forth on the horizontal. Just

loosen the clamp nut to swing the side

handle to a desired position. Then tighten

the clamp nut securely.

The side handle also can be mounted in the

rear groove. Loosen the clamp nut and

widen the side handle base. Slide the side

handle back to the rear groove and secure

with the clamp nut.

Side handle

Loosen -Tighten

Side handle base

Table of Contents