Table of Contents
Advertisement
PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version may not be identical
to this one.
PNP OS Installed
If you selected "Yes", the BIOS will detect the Plug and Play devices
for some compatible resources.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled The BIOS will not reset the configuration data.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto
The system will automatically detect the settings for you.
Manual
Choose the specific IRQ and DMA in the "IRQ
Resources" and "DMA Resources" field respectively.
3
BIOS Setup
8 9
Advertisement
Table of Contents
