Table of Contents
Advertisement
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the "ACPI Suspend Type" field is set to "S3(STR)".
USB KB Wake-Up From S3
This field, when enabled, allows you to use a USB keyboard to wake
up a system that is in the S3 (STR - Suspend To RAM) state. This
can be configured only if the "ACPI Suspend Type" field is set to
"S3(STR)".
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the Suspend
mode and HDD Power Down fields are activated.
Min Saving
Max Saving
User Define
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn
Blank Screen
DPMS
Video Off In Suspend
This field is used to activate the video off feature when the system
enters the Suspend mode. The options are Yes and No.
Minimum power saving time for the Suspend Mode
(1 hour) and HDD Power Down (15 min.)
Maximum power saving time for the. Suspend
Mode and HDD Power Down = 1 min.
Allows you to set the power saving time in the
"Suspend Mode" and "HDD Power Down" fields.
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initializes display power management signaling. Use
this option if your video board supports it.
3
BIOS Setup
8 5
Advertisement
Table of Contents
