Table of Contents
Advertisement
ATTACHING TABLE LOCK HANDLE
Thread the table lock handle (A) Fig. 5 into the threaded hole of the arm bracket (C).
ROTATING TABLE
Loosen the table-lock handle one or two turns. Raise
the index lever (B) Fig. 5 and rotate the table to the
desired position. Tighten the table-lock handle.
MOVING CUTTINGHEAD TO THE UP POSITION
1.
Push down on cuttinghead and pull out cuttinghead lock knob (A) Fig. 6.
2.
Move the cuttinghead to the up position.
ATTACHING DUST BAG
Attach the dust bag (A) Fig. 7 to the dust spout (B) making sure the wire ring (C) is engaged with the ridge in the spout
(see inset).
A
Fig. 6
FASTENING MACHINE TO SUPPORTING SURFACE
Before operating your compound miter saw, mount it to
a sturdy workbench or other supporting surface. Four
holes are provided, two of which are shown at (A) Fig. 8.
When frequently moving the saw from place to place,
mount the saw to a 3/4" piece of plywood. The tool can
then be easily moved from place to place and the
plywood can be clamped to a supporting surface using
"C" clamps.
B
A
Fig. 5
Fig. 7
Fig. 8
9
C
C
A
A
B
Advertisement
Table of Contents
