A S S E M B Ly Instructions; Moving Cuttinghead To The Up Position; Moving Table To The 90 Degree Cut-Off Position; Moving Table To 90 Degree Cut-Off - Delta Sidekick 36-235 Instruction Manual

W ARNING: F O R Y O U R O W N SAFETY, DO N O T C O N N E C T T H E MITER S AW TO T H E
P O W E R S O U R C E UNTIL T H E M A C H I N E I S C O M P L E T E LY A S S E M B L E D A N D Y O U
H AV E R E A D A N D U N D E R S TO O D T H E ENTIRE O W N E R S MANUAL.
MOVING CUTTINGHEAD
TO THE UP POSITION
1 . Pull out cuttinghead lockpin (A) Fig. 4, and move the
cuttinghead (B) to the up position.
2 . F i g . 5 , i l l u s t r a t e s t h e l o c k p i n ( A ) pulled out and the
cuttinghead (B) in the up position.
MOVING TABLE TO
THE 90 DEGREE
C U T-OFF POSITION
1 . Depress table lock lever (A) F i g . 6 , a n d r o ta t e table (B)
to the 90 degree straight cut-off p o s i t i o n . Then release
l o c k l e v e r ( A ) .

A S S E M B LY INSTRUCTIONS

A
B
6
B
F i g . 4
A
F i g . 5
B
A
F i g . 6