Audio Unit Operation; On/Off Control; Sound Button; Waveband Button - Ford Focus Owner's Handbook Manual

ON/OFF CONTROL

Press the on/off control. This will also
operate the unit for up to one hour with
the ignition turned off.
The radio will switch off automatically after
one hour.

SOUND BUTTON

This will allow you to adjust the sound
settings (for example bass and treble).
1. Press the sound button.
2. Use the up and down arrow buttons
to select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.

WAVEBAND BUTTON

Press the RADIO button to select from
the wavebands available.
The selector can also be used to return
to radio reception when you have been
listening to another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.

STATION TUNING CONTROL

DAB service linking
Note: The DAB service linking is as per
default off.
Note: Service linking allows
cross-referencing to other corresponding
frequencies of the same station, for
example FM and other DAB ensembles.

Audio unit operation

242
Note: The system will automatically
change to another corresponding station
if the current one becomes unavailable,
for example when leaving the coverage
area.
Switching DAB service linking on and off.
See General information (page 83).
Seek tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual tuning
Type 1
1. Press the MENU button.
2. Select RADIO mode and then
MANUAL TUNE.
3. Use the left and right arrow buttons to
tune down or up the waveband in
small increments or press and hold to
increment quickly, until you find a
station you want to listen to.
4. Press OK to continue listening to a
station.
Type 2 and 3
1. Press function button 2.
2. Use the left and right arrow buttons to
tune down or up the waveband in
small increments or press and hold to
increment quickly, until you find a
station you want to listen to.
3. Press OK to continue listening to a
station.
Scan tuning
Scan allows you to listen to a few seconds
of each station detected.