Technical Specifications - Ford Focus Owner's Handbook Manual

TECHNICAL SPECIFICATIONS

Vehicle fluids
Do not use fluids which do not meet the specifications or requirements defined.
Use of unsuitable fluids may lead to damage which is not covered by your Warranty.
Item
Engine oil - petrol and diesel
engines
Alternative engine oil -
petrol engines only
Antifreeze
Brake fluid
Your engine has been designed to be used with Castrol and Ford Engine Oil, which
gives a fuel economy benefit whilst maintaining the durability of your engine.
For petrol engines only, Ford and Castrol have developed a low friction SAE-5W-20
oil which offers further fuel economy benefits over the standard SAE-5W-30 oil. If this
oil is not available, we recommend that you service with oil to specification
WSS-M2C913-C.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-C or WSS-M2C925-B (petrol engines only), you must use SAE
5W-30 that meets the specification defined by ACEA A5/B5.
Using topping up oils other than the one specified can result in longer engine cranking
periods, reduced engine performance, reduced fuel economy and increased emission
levels.
Castrol engine oil recommended.
E115472
Maintenance
CAUTION
Specification
WSS-M2C913-C
WSS-M2C925-B
WSS-M97B44-D
WSS-M6C57-A2
208
Recommended fluid
Castrol or Ford Engine Oil
Castrol Engine Oil
Motorcraft SuperPlus Anti-
freeze
Ford or Motorcraft Super
DOT 4 Brake Fluid