Ford Focus Owner's Handbook Manual page 220

E121887
2. Slacken the wheel nuts.
3. Jack up the vehicle until the tyre is
clear of the ground.
4. Remove the wheel nuts and the
wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical specifications (page 224).
Do not fit run flat tyres on vehicles
that were not originally fitted with
them. Please contact your dealer
for more details regarding compatibility.
Wheels and tyres
1
2
218
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: The wheel nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub
contact surfaces are free from foreign
matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.
1
3
5
E75442
4. Partially tighten the wheel nuts in the
sequence shown.
5. Lower the vehicle and remove the
jack.
6. Fully tighten the wheel nuts in the
sequence shown. See Technical
specifications (page 224).
7. Install the wheel trim using the ball of
your hand.
4
2