Audio Unit Operation; On/Off Control; Sound Button; Waveband Button - Ford FOCUS Owner's Manual

ON/OFF CONTROL

Press the button with the ignition switched
off. This will operate the audio unit for up
to one hour.
If you switch the audio unit on before you
switch the ignition off, the audio unit will
switch off automatically after 10 minutes
or when you open one of the front doors.

SOUND BUTTON

This will allow you to adjust the sound
settings (for example bass and treble).
1. Press the sound button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.

WAVEBAND BUTTON

Press the RADIO button to select from the
wavebands available.
The selector can also be used to return to
radio reception when you have been
listening to another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.

STATION TUNING CONTROL

DAB service linking

Note: The DAB service linking is as per
default off.
Focus (CB8) Vehicles Built From: 03-03-2014, Vehicles Built Up To: 31-12-2014, CG3568en enGBR, Edition date: 03/2014, None

Audio unit operation

Note: Service linking allows
cross-referencing to other corresponding
frequencies of the same station, for example
FM and other DAB ensembles.
Note: The system will automatically
change to another corresponding station if
the current one becomes unavailable, for
example when leaving the coverage area.
Switching DAB service linking on and off.
See General Information (page 79).

Seek tuning

Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.

Manual tuning

Type 1
1.
2. Select RADIO mode and then MANUAL
3. Use the left and right arrow buttons to
4. Press OK to continue listening to a
Type 2 and 3
1.
2. Use the left and right arrow buttons to
3. Press OK to continue listening to a
262
Press the MENU button.
TUNE.
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
station.
Press function button 2.
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
station.