Audio Unit Operation; On/Off Control; Manual Tuning; Sound Button - Ford RANGER Owner's Manual

ON/OFF CONTROL

Press the on/off control. This will also
operate the unit for up to one hour with the
ignition turned off.
The radio will switch off automatically
after one hour.

SOUND BUTTON

This will allow you to adjust the sound
settings (for example bass and treble).
1. Press the sound button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.

WAVEBAND BUTTON

Press the RADIO button to select from the
wavebands available.
The selector can also be used to return to
radio reception when you have been
listening to another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.

STATION TUNING CONTROL

Seek tuning

Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Ranger (TKE) Vehicles Built From: 01-10-2014, DB39120609AD (CG3575en) enGBR, Edition date: 09/2014, First Printing

Audio unit operation

Manual tuning

Type 0 and 1
1.
2. Use the seek buttons to tune down or
Type 2
1.
2. Select RADIO mode and then MANUAL
3. Use the left and right arrow buttons to
4. Press OK to continue listening to a
Type 3, 4 and 5
1.
2. Use the left and right arrow buttons to
3. Press OK to continue listening to a

Scan tuning

Scan allows you to listen to 8 seconds of
each station detected.
Type 0 and 1
1.
2. Short press the SCAN/AS button, the
254
Make sure FM/AM mode is active and
then MANUAL TUNE.
up the waveband in small increments
or press and hold to increment quickly,
until you find a station you want to
listen to.
Press the MENU button.
TUNE.
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
station.
Press function button 2.
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
station.
Press the FM/AM button.
radio will automatically scan up the
selected waveband.