Keyless Starting - Ford Focus Owner's Handbook Manual

2. Fully depress the brake pedal.
3. Start the engine.

KEYLESS STARTING

WARNINGS
The keyless starting system may not
function if the key is close to metal
objects or electronic devices such
as mobile phones.
Always check that the steering
wheel lock is deactivated before
attempting to move your vehicle.
See Steering wheel lock (page 124).
Note: A valid passive key must be
located inside the vehicle to switch the
ignition on and start the engine.
Note: To start your engine you must also
fully depress the brake or clutch pedal,
depending on the transmission fitted.
E85766
Ignition on
Press the start button once. All electrical
circuits are operational, warning lamps
and indicators illuminate.
Starting with automatic
transmission
Note: Releasing the brake pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Make sure the transmission is in P or
N.
Starting the engine
127
2. Fully depress the brake pedal.
3. Press the start button.
Starting with manual
transmission
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Fully depress the clutch pedal.
2. Press the start button.
3. If the engine does not start, fully
depress the brake and clutch pedals
and try again.
Starting a diesel engine
Note: Engine cranking may not
commence until the engine glow plug
cycle has been completed. This may take
several seconds in extremely cold
conditions.
Note: Continue to press the clutch or
brake pedal until engine cranking begins.
Failure to start
The passive starting system will not
function if:
• The passive key frequencies are
jammed.
• The passive key battery is flat.
If you are unable to start your vehicle carry
out the following procedure.