Connecting A Vcr Or Similar Device; Connecting To The Line In 1 Or 3 Jacks - Sony RDR-HX750 Operating Instructions Manual

Connecting a VCR or Similar Device

After disconnecting the recorder's AC power cord from the AC outlet, connect a VCR or
similar recording device to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
(page 75).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see "Recording from Connected Equipment" on page 50.

Connecting to the LINE IN 1 or 3 jacks

Connect a VCR or similar recording device to the LINE IN 1 or 3 of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
Audio/video cord
(not supplied)
26
OUTPUT
AUDIO VIDEO
R L
: Signal flow
VCR, etc.
S VIDEO
S-video cord
(not supplied)
to LINE IN 1 or 3
DVD recorder