Step 6: Easy Setup - Sony RDR-HX750 Operating Instructions Manual

Step 6: Easy Setup

Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
Be careful not to disconnect the cables or exit
the "Easy Setup" function during this
procedure.
O RETURN
1
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
The "Language" display appears.
• If the "Language" display does not
appear, select "Easy Setup" in the
"Basic" setup from "Initial Setup" in
the System Menu (page 101).
2
Select a language for the on-screen
displays using
ENTER.
The initial settings message appears.
3
Select "Start" using M/m, and press
ENTER.
Follow the on-screen instructions to
make the following settings.
24
[/1
</M/m/,,
ENTER
TV [/1
, and press
</M/m/,
Auto Channel Setting
Select whether or not you have a cable
connection ("Cable" or "Antenna").
Auto channel setting automatically
searches for all of the receivable channels
and presets them.
To skip this setting, select "Do not set."
To set the channels manually, see
page 102.
Clock Setting
Select "Auto" when you use antenna
hookup C (page 16). The "Auto Clock
Setting" display appears.
1
Select the channel of the station that
carries a time signal using </,.
2
Select "Start" using m, and press
ENTER.
If a clock signal cannot be found,
press O RETURN, and set the
clock manually.
Select "Manual" to set the clock
manually. The "Manual Clock Setting"
display appears.
1
Select the time zone for your area
using </,, and press m.
2
Select "On" using </, if you are
now on D.S.T (Daylight Saving
Time), and press ENTER.
3
Set the month, day, year, hour, and
minutes using </M/m/,, and
press ENTER to start the clock.
TV Screen Size (page 109)
If you have a wide-screen TV, select
"Wide (16:9)." If you have a standard
TV, select "Standard (4:3)." This will
determine how "wide-screen" images are
displayed on your TV.
Progressive
When you connect a progressive format
TV to this recorder using the
COMPONENT VIDEO OUT jacks,
select "Compatible."
HDD caution messages
Read the HDD caution messages, and
press ENTER.
4
Select "Finish Setup" using M/m, and
press ENTER.
"Easy Setup" is completed.