Connecting A Vcr Or Similar Device; Connecting To The Line 1 In Jacks - Sony RDR-HXD760 Operating Instructions Manual

Connecting a VCR or Similar Device

After disconnecting the recorder's AC power cord (mains lead) from the mains, connect a VCR
or similar recording device to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
(page 75).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see "Recording from connected equipment without a timer" on
page 50.

Connecting to the LINE 1 IN jacks

Connect a VCR or similar recording device to the LINE 1 IN of this recorder. If the equipment
has an S-video jack, you can use an S-video cord instead of an audio/video cord.
Audio/video cord
(not supplied)
to LINE 1 IN
: Signal flow
OUTPUT
AUDIO VIDEO
R L
VCR, etc.
S VIDEO
S-video cord
(not supplied)
DVD recorder
,continued
21