Video Settings (Video Out); Audio Input Settings (Audio In) - Sony RDR-HX750 Operating Instructions Manual

Video Settings (Video
Out)
The "Video Out" settings will adjust items
related to the image, such as size and color.
Select the settings according to the type of
TV, tuner, or decoder connected to the DVD
recorder.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "Video Out," and press ENTER.
The "Video Out" setup appears with the
following options. The default settings
are underlined.
Component Video Out
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
Normal(Inter- Outputs signals in the
lace) interlace format.
Progressive Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.
b
Notes
• When picture noise appears after you set the
recorder to progressive format, hold down
x (stop) on the recorder, and press Z (open/
close) on the recorder.
• No video signals are output when using the
HDMI connection.
Audio Input Settings
(Audio In)
The "Audio In" setup allows you to adjust the
sound according to the playback and
connection conditions.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "Audio In," and press ENTER.
The "Audio In" setup appears with the
following options. The default settings
are underlined.
External Audio
Stereo Select this when receiving
stereo programs from
connected equipment.
Dual Mono Select this when receiving
Dual Mono program from
connected equipment.
z Hint
If you select "Dual Mono," then record Dual Mono
programs on the HDD (when "HDD Recording
Format" is set to "Video Mode Off" (except in
PCM recording mode)) or a DVD-RW/DVD-R in
VR mode (except in PCM recording mode), both
audio channels are recorded and you can select the
sound while playing by using the AUDIO button.
b
Note
When receiving audio input signals from the DV
input jack, the recorder automatically selects
"Stereo" or "Dual Mono" regardless of the
"External Audio" setting.
103
,continued