Checking The Disc Status While Recording - Sony RDR-HX750 Operating Instructions Manual

4
Press z REC.
Recording starts.
When recording to the HDD, recording
stops after 12 hours of continuous
recording or when the HDD is full.
When recording to a DVD, recording
stops when the DVD is full.
To stop recording
Press x REC STOP.
Note that it may take a few seconds for
recorder to stop recording.
To watch another TV program while
recording
Set your TV to the TV input using the TV
INPUT button (page 22).
z Hint
If you do not want to watch TV while recording,
you can turn off the TV. When using a decoder,
make sure to leave it on.
b
Notes
• If you press the [/1 button while recording, the
recorder stops recording and turns off.
• After pressing the z REC button, it may take a
short while to start recording.
• You cannot change the recording mode while
recording.
• If there is a power failure, the program you are
recording may be erased.
Checking the disc status while
recording
You can check the recording information
such as recording time or disc type.
Press DISPLAY during recording.
The recording information appears.
A Recording mode
B Recording time
C Disc type/format
D Recording status
Press DISPLAY to turn off the display.
31