Step 6: Easy Setup - Sony RDR-HXD760 Operating Instructions Manual

Step 6: Easy Setup

Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
O RETURN
1
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
The initial settings message appears.
• If this message does not appear, select
"Easy Setup" from "SETUP" in the
System Menu ("Settings and
Adjustments" on page 80).
2
Press ENTER.
Follow the on-screen instructions to
make the following settings.
Easy Setup - Digital Software Upgrade
Select "On" to enable automatic
upgrades of software (page 86).
Easy Setup - Region
Select your region (page 81).
Easy Setup - Automatic Clock Adjust
Select "On" to set the clock
automatically (page 80).
Easy Setup - Auto Tune
The recorder will automatically capture
and store the available TV and Radio
channels.
20
The recorder will automatically search
for a clock signal. If a clock signal cannot
be found, set the clock manually using
</M/m/,, and press ENTER.
If you have a wide-screen TV, select
[/1
"16:9." If you have a standard TV, select
either "4:3 Letter Box" (shrink to fit) or
"4:3 Pan Scan" (stretch to fit). This will
determine how "wide-screen" images are
displayed on your TV.
If you connected an AV amplifier
(receiver) using either a digital optical or
coaxial cord, select "Yes : DIGITAL
</M/m/,,
OUT" and set the digital output signal
ENTER
(page 89).
3
Press ENTER when "Finish" appears.
"Easy Setup" is finished.
To return to the previous step
TV [/1
Press O RETURN.
z Hints
• If your AV amplifier (receiver) has an MPEG
audio decoder, set "MPEG" to "MPEG"
(page 89).
• If you want to run "Easy Setup" again, select
"Easy Setup" from "SETUP" in the System Menu
(page 95).
Easy Setup - Clock
Easy Setup - TV Type (page 86)
Easy Setup - Audio Connection