Ec-Declaration Of Conformity - Husqvarna 1153286-26 Operator's Manual

Approved accessories
Blade shaft thread M10
Plastic blades
Trimmer head
The following attachments are recommended for the specified models.
Approved accessories
Clean sweep attachment with shaft SR600
Hedge trimmer attachment with shaft HA 110 537 19 66-01
Hedge trimmer attachment with shaft HA 850 537 19 66-02
Edger attachment with shaft
Saw attachment with shaft PA 1100
Trimmer attachment with shaft TA 850
The following attachments have been developed mainly for the Husqvarna 125LD trimmer, but can also be used with the
specified models.
Approved accessories
Cultivator attachment CAC
Edger attachment EAC
Pole saw attachment PAC
Blower attachment BAC
Hedge trimmer attachment HAC
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
324LDx with serial numbers dating from 2009 onwards (the year is clearly stated on the rating plate, followed by the
serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN ISO 12100-2/A1:2009, CISPR 12:2001, EN ISO 11806:2008
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered: SEC/09/2168, 01/164/037
Huskvarna December 29, 2009
Bo Jonsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
24 – English
TECHNICAL DATA
Type
Tricut Ø 255 mm (Separate blades
have part number 531 01 77-15)
Tricut Ø 300 mm (Separate blades
have part number 531 01 77-15)
Trimmy Fix (Ø 2.4 mm cord)
Superauto II (Ø 2.4 - 2.7 mm cord)
S35 (Ø 2.4 - 3.0 mm cord)
T25 (Ø 2.0 - 2.7 mm cord)
T35, T35x (Ø 2.4 - 3.0 mm cord)
Art No.
537 19 67-01
537 19 69-01
537 18 33-16
537 35 35-01
Art No.
952 71 19-07
952 71 19-08
952 71 19-10
952 71 19-11
952 71 19-21
Cutting attachment guard, Art. no.
503 93 42-02 / 503 97 71-01
503 93 42-02
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
Use with
324LDx
324LDx
324LDx
324LDx
324LDx
324LDx
Use with
324LDx
324LDx
324LDx
324LDx
324LDx