Kenwood DPX503 Instruction Manual page 20

Audio Adjustments
Function of DPXS03
X'Over setting
You can set a X'Over value for the speakers;
Rear High Pass Filter "HPF-Rear"
2
Select the item you want to set
Turn the Control knob.
3
Set the value
Turn the Control knob.
4
Exit Equalizer Control mode
Press the [FNC] button.
Low Pass Filter
"LPF"
Subwoofer level
Subwoofer Phase
1
Enter X'Over setting mode
Select "SOUND"
>
"S-SET"
>
"XOVER'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the item you want to set
Turn the Control knob and push the center
when the desired item is displayed.
3
Set the X'Over value
Turn the Control knob.
4
Exit X'Over setting mode
Press the [FNC] button.
Function of DPXS03
Equalizer Control
You can adjust following Equalizer Control items;
Basslevel*
Middle level*
Treble level*
* Source tone memory: Puts the set up value in the
memory per source.
~
~
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Enter Equalizer Control mode
Select "SOUND"
>
"S-CTRl"
>
"EQ'~
For how to select Function Control item, refer to
<Function Control> (page 6).
20
I
DPXS03/DPX303
Function of DPXS03
Preset position selection
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
1
Enter Position setting mode
Select "SOUND"
>
"S-CTRl"
>
"POSIT"
>
"P-POSI'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the seat you want to compensate
Turn the Control knob.
3
Exit Position setting mode
Press the [FNC] button.