Cradlepoint MBR1400 Product Manual page 111

MBR1400 | USER MANUAL – Firmware version 4.2
CRADLEPOINT
Channel: (Shows if User Selection is selected.) The WiFi channel corresponds to a frequency the router uses to
communicate with other devices. For 2.4 GHz, the range is 1 to 11, and 1, 6, and 11 do not overlap each other. If a
WiMAX modem is attached, a higher number channel will increase the chance the router's WiFi and modem's WiMAX
radios will conflict with each other, which may result in lower throughput. Select a channel from the dropdown list:
• 1 (2412 MHz)
• 2 (2417 MHz)
• 3 (2422 MHz)
• 4 (2427 MHz)
• 5 (2432 MHz)
• 6 (2437 MHz)
• 7 (2442 MHz)
• 8 (2447 MHz)
• 9 (2452 MHz)
• 10 (2457 MHz)
• 11 (2462 MHz)
For 5.0 GHz, the ranges are 36 to 64 and 149 to 165. These channels do not interfere with a WiMAX modem. If you
choose to use 5.0 GHz, you should consider switching antennas. The default WiFi antennas are optimized for the
2.4 GHz range.
• 36 (5180 MHz)
• 40 (5200 MHz)
• 44 (5220 MHz)
• 48 (5240 MHz)
• 149 (5745 MHz)
• 153 (5765 MHz)
• 157 (5785 MHz)
• 161 (5805 MHz)
• 165 (5825 MHz)
Client Timeout: If the access point is not able to communicate with the client it will disconnect it after this timeout (in
seconds).
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 109