AMT Datasouth Fastmark 600 Series User Manual page 76

Poor Print Quality
Fastmark 600 Series User's Guide
Verify Media stock
Verify Printhead Latches
are closed.
Other Possible Solutions
1. Change Media with Stock from another unopened box.
2. Verify that Stock is Direct Thermal material.
1. Open Top cover
2. Press firmly on the Printhead Mechanism and verify
that the right and left latches are locked.
q
Verify type of media and ribbon are compatible.
q
Verify ribbon is not being used with direct thermal
media.
q
Lower the print speed and adjust print darkness.
q
Verify print head is clean.
q
Verify platen roller is clean.
q
Verify media and ribbon are both loaded as described
in media and ribbon loading sections.
q
Replace print head if print out continues to be streaked
or missing and all of above does not resolve.
76