Windows Printer Driver; Windows 2000 Driver Installation - AMT Datasouth Fastmark 600 Series User Manual

WINDOWS PRINTER DRIVER

Windows 2000 Driver Installation

1. From the task bar select Start->Settings->Printers. The printer's folder should be displayed.
2. Double click the Add Printer icon.
q The Add Printer Wizard dialog should be displayed.
Click the Next button.
q
3. Select the Local printer option and click the Next button.
4. Select the desired printer port and click the Next button.
5. From the Manufacturers list dialog click the Have Disk button.
6. From the Install From Disk dialog browse to the location of the driver files and click OK.
7. From the Install from Disk dialog, select the displayed .inf file and click OK.
8. Click OK from the Install From Disk dialog.
9. The Add Printer Wizard should now display the available models for this driver. Select the model you wish to
install and click Next.
10. Select Replace existing driver and click Next.
11. From the Name your printer dialog, enter the name you wish to call the printer. This name will be displayed
in the Printers Dialog. Also, if you want this printer to be the default system printer, click this check box now.
Click the Next button.
12. Select the desired option from the Printer Sharing dialog and click Next.
13. Select No to the print test page question since the test page does not fit within the printers page size and click
Next.
14. Click the Finish button on the Completing the Add Printer Wizard. If a Hardware Installation message is
displayed, click Continue Anyway. A printer icon should be added to the list of printers. If a message is
displayed indicating the installation could not be completed, you may need to change the security level for
installing drivers and repeat the installation process.
If you have set the printer as the default printer, the driver is now ready for use.
If you did not set the printer as the default printer, you can change the setting by right clicking on the printers' icon
and select 'Set as Default' from the dialog.
If you are replacing an existing driver, you may have to reboot your system in order to reload the new driver.
Fastmark 600 Series User's Guide 58