AMT Datasouth Fastmark 600 Series User Manual page 39

Setup Feature and Value List (continued)
Vert Print Align
Horz Print Align
Vert Size Adjust
Print Darkness
Print Speed
Interface Select
COM1: Baud Rate
COM1: Parity
COM1: Data Bits
COM1: Handshake
COM1: PAL Xmit
Fastmark 600 Series User's Guide
[ -0.50 - +0.50 ] (Inches)
[ 0.00 - 1.00 ] (Inches)
[ -60 - + 60 ]
[ -12 - +12 ]
[ 2, 3, 4, 5, 6] (IPS)
[ Parallel Only, Serial Only, Auto
Select ]
[ 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600 ]
[ None, Odd, Even ]
[ 7, 8 ]
[ RTS, XON/XOFF, RTS & XON,
None ]
[ Enabled, Disabled ]
Adjust to move printed image up or down
on label. Positive values move image up.
Negative values move image down. After
setting this feature the printer will feed to
the top of the next label.
Adjust to move printed image left or right.
Larger values move the image to the right.
Vertically expands or compresses print
image. Negative values are compressed,
positive values are expanded.
Adjust for optimal print darkness. Positive
values are darker.
Adjusts print speed.
Selects active interface while ignoring non-
selected interface. Setting to Auto Select
enables both interfaces and performs
automatic port arbitration.
Set to match host.
Set to match host.
Set to match host.
Set to match host.
Enables or disables trans-mission of PAL
messages over serial interface.
This does not affect software handshaking
functions.
TM
39