Loading Media Into The Peeler; Figure 23 – Label Removal For Peeler Option; Figure 24 – Straight Edge And Peeler Latch - AMT Datasouth Fastmark 600 Series User Manual

Loading Media into the Peeler

1. Install media as indicated in the Loading Media Section. Return to these steps when
directed to do so.
2. Remove about the first 6 inches of Labels from the media Backing.
3. Make sure the leading edge of the Media Backing has a straight edge.
4. Pull down the Peeler Latch.
Peeler Latch
Fastmark 600 Series User's Guide
Figure 23 – Label Removal for Peeler Option
Figure 24 – Straight Edge and Peeler Latch
28