Boot Mode Feature and Value List
The Boot Mode has several programmable features that are used during firmware updates. Click the Display
Up/Down buttons to access the Boot mode features.
FEATURE NAME
Download New F/W
Reboot System
Interface Select
COM1: Baud Rate
COM1: Parity
COM1: Data Bits
COM1: Handshake
Firmware Rev.
Fastmark 600 Series User's Guide
VALUE RANGE
N/A
Click the Enter button to start download mode. The
display will change to:
Download New F/W
Waiting For Data / <CANCEL to Stop>
The printer will wait on a firmware update file on the
Parallel ports. The FlashWiz Lite section of the Feature-
Man program is used to download firmware files.
N/A
To exit boot mode and return to normal PAL
mode, click the Enter button. After a firmware update is
complete, this feature is automatically selected and allows
the printer to be rebooted with the newly loaded firmware.
Identical to feature in standard setup mode.
Defaults to 57K baud when in boot mode. Change to
match host if needed.
Change to match host if needed.
Change to match host if needed.
Change to match host if needed.
Displays revision of boot code currently loaded. The boot
code can only be updated by changing Flash chips located
on main board.
DESCRIPTION
TM
firmware
89