Glacial 75IECHK-SC-SP User Manual page 10

11. Wipe inside of reservoir and area around both taps with a soft cloth using the mixture of one
gallon tap water and 1 tablespoon unscented household bleach. If there is mineral build-up
(white chalky deposits) use a household product designed to remove calcium, lime or rust.
These can be found in grocery and hardware stores. Follow manufacturer's label instructions.
12. Pour the one gallon tap water and 1 tablespoon unscented household bleach mixture into
the reservoir.
13. Dispense 1 cup of mixture through both faucets to clean out water ways.
14. Place a 2 gallon or larger bucket under the drain plug in the rear
of the dispenser.
Remove drain cap and silicon plug to drain.
Reminder - Place drain cap and silicon plug in a safe location so
they are not lost.
15. Remove remaining cleaning mixture from reservoir by
dispensing from both taps into a pitcher.
16. Replace drain cap and silicone plug.
17. Rinse system by repeating steps 12-15 above, but this time
using 1 gallon of tap water.
18. Remove remaining water from reservoir by dispensing from both
taps into a pitcher.
19. Replace all parts including silicon plug, drain cap, baffle and probe assembly.
20. Turn unit around and re-clip Wall Mount Strap to back of dispenser.
21. Install a fresh bottle of water after cleaning bottle cap and neck area.
22. Plug power cord into grounded wall outlet.
23. Turn energy saving switch ON.
Model # 75IECHK-SC-SP :Page 10