TDK Tremor S-150 User Manual page 5

PREPARING SATELLITES
FOR THE S-150 AND S-80
OPTION 1 - Desktop placement
Slide each satellite speaker onto
1)
the desktop stands (two prong)
until the base is reached.
Place the cable from the satellite
2)
into the recessed groove under
the desktop stand.
OPTION 2 - Monitor or Wall placement
TDK Tremor satellites can be
attached to a computer monitor,
wall or other object using the
supplied double stick tape.
Slide and rotate each satellite
1)
onto the mounting bracket
until the base is reached.
Peel off the backing paper
2 )
and press firmly to attach.
For best adhesion, clean the
s u rface where you will be
placing the mounting bracket
b e f o re attaching the satellites.
If screwing the satellites into
3)
a wall or other surface, make
sure the screws (not supplied)
will support the unit.
WARNING:
Do not screw brackets into
any electrical unit such as
a computer monitor.