TDK Tremor S-150 User Manual page 4

QUICK SET -UP AND GO
Attach desired stands to satellites.
1)
Place speakers in their desired spot.
2)
Connect all speaker cables to subwoofer.
3)
Connect sound source to subwoofer.
4)
Plug in subwoofer to any wall outlet and switch ON.
5)
Start your application and turn up the volume!
6)
SATELLITE PLACEMENT
• Before connecting the wires to the speaker system,
place the satellites on either side of the monitor.
• Position both satellites facing straight out or at a slight
angle toward the listening position. Because the satellites
have a wider dispersion pattern with a larger "sweet spot"
than conventional speakers, the placement angle is
not critical.
• Do not place the speakers behind the monitor, or the
monitor will block and reflect the sound and degrade
sound quality.
(S-150 and S-80 only)