Part Names And Functions; Indoor Unit - Mitsubishi Electric Mr.Slim PKH-2FKA Technical & Service Manual

2

PART NAMES AND FUNCTIONS

Indoor Unit

Air intake
Room air is suctioned
in here.
Guide vane
Air flow can be changed to horizontally
by moving the Guide vane to the left or
right.
Remote controller
Once the operation of the unit is set, subsequent operations can only be performed by pressing the ON/OFF button repeat-
edly.
Operation buttons
w button
This switches between continuous
operation and the timer operation
button
Press this button to switch the cooler
electronic dry (dehumidify), automat-
ic and heater modes.
i TEMP button
This sets the room temperature. The
temperature setting can be per-
formed in 1°C units.
Setting range :
Cooler 19°C to 30°C
Heater 17°C to 28°C
The model name of the remote con-
troller is indicated.
PAR-JH241KA(2.5 ~ 4)
PAR-JH150KA(2)
Filter
(Removes dust and dirt from the intake air.)
Air outlet
q button
This sets or switches the current
time, start time and stop time.
CHECK
button
This switches the horizontal fan
motion ON and OFF.
(This button does not operate in this
model.)
3
Air intake grille
Auto vane
Air outlet
button
The sets the ventilation fan speed.
FILTER
CHECK MODE
TEST RUN
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation
ON/OFF button
This switches between the operation
and stop modes each time it is
pressed. The lamp on this button
lights during operation.
j button
This adjusts the vertical angle of the
ventilation.
FILTER button
This resets the filter service indica-
tion display