How To Turn On Your Amplifier - Jadis I-35 Owner's Manual

How to turn ON your amplifier

In order to get the best performance from your Jadis amplifier, it is
necessary to follow carefully the instructions below:
1- Check that the power switch is OFF.
2- Verify that the volume control is set to minimum.
3- Connect the loudspeaker wires to the red and black terminals
output at the back of the amplifier.
4 - Connect the interconnect cables between the sources and the
integrated amplifier input RCA connectors.
5 - Connect the mains cord of your amplifier which is detachable to
facilitate safer and easier moving of the unit. Always use the power cord
supplied or one of equivalent electrical rating. Insert the power cord into
its socket on the unit before plugging the other end to the mains network.
6 - Turn on the amplifier by setting the power switch to on.
7 - To change the source, be sure the volume is set to minimum before
turn the source selector.
Your Jadis integrated amplifier is now ready to play. However, its
optimum sound quality will be reached only when the amplifier reaches
its ideal temperature (after about 1/2 hour of operation).
Turn off your amplifier when you don't listen to it for a long time
(exemple: during the night).