How To Turn On Your Preamplifier - Jadis JPL Owner's Manual

How to turn ON your preamplifier

In order to get the best performance of your Jadis preamplifier, it is
necessary to follow carefully the instructions below:
1- Check that the power switch is OFF.
2- Connect the sources cables (CD, tuner,...) to the appropriate
inputs, and, your amplifier to your preamplifier outputs according to
your listening choice...
3 - Make sure that:
The power switch ON/OFF of the power supply is set to OFF;
The switch « MUTING » is set to OFF;
The « SOURCE » selector select the wanted input;
The volume control knobs set to 0 (thoroughly counter
clockwise) and, the balance control knobs is on center position.
4 - Connect the mains cord of your preamplifier which is detachable
to facilitate safer and easier moving of the unit. Always use the power cord
supplied or one equivalent electrical rating. Insert the power cord into its
socket on the unit before plugging the other end to the mains network.
Your Jadis preamplifier is now ready to operate. However, its
optimum sound quality will be reached only when the preamplifier reaches
its ideal temperature (after about 1 hour of operation).
For running your preamplifier, set the power switch to ON. To stop,
reverse the operation.