How To Turn On Your Amplifier - Jadis JA30 Owner's Manual

How to turn ON your amplifier

In order to get the best performance from your Jadis amplifier, it is
necessary to follow carefully the instructions below:
1- Check that the power switch is OFF.
2- Check that the OPERATE/STANDBY switch is set to
STANDBY.
3- Connect the loudspeaker wires to the red and black terminals
the back of the amplifier.
4 - Connect the interconnect cables between the preamplifier
outputs and the amplifier input connectors.
5 - Connect the mains cord of your amplifier which is detachable to
facilitate safer and easier moving of the unit. Always use the power cord
supplied or one of equivalent electrical rating. Insert the power cord into
its socket on the unit before plugging the other end to the mains network.
Your Jadis amplifier is now ready to operate. However, its optimum
sound quality will reached only when the amplifier reaches its ideal
temperature (after about 1 hour of operation).
For running your amplifier, set the POWER switch to ON, wait 5 to
10 minutes then set the OPERATE / STANDBY switch to OPERATE and
you will be listening. To stop, reverse the operation.
at