Control Panel And Adjustments - Ice-O-Matic HISU056 Installation And User Manual

User Manual for Models HISU056, HISU076 AND HISU096

Control Panel and Adjustments

Ice Bridge Thickness Adjustment Area
Ice Bridge Thickness Adjustment
Ajuste da espessura da ponte de gelo
-
+
-
+
17-3386-41
Ice Thickness Diagram
Ice Too Thin
Ice Just Right
Bridge
Ice Too Thick
Adjustment Indicator Lights
Each push and release of the + or - button will change
the lights that glow or blink indicating a change in ice
size or harvest time. Example: pushing + one time
changes a blinking light to steady on type. If the lights
are on steady a single push of + will add one more
light to the right and it will blink. There are 10 settings.
All 5 lights on steady is the maximum setting and one
blinking light is the minimum.
ON / OFF / WASH
Ligar / desligar / lavar
Master Switch. Move to ON (left side depressed) to make ice, OFF
(centered) to shut off and WASH (right side depressed) for use in
cleaning.
Harvest Time Adjustment Area
Harvest Time Adjustment
Ajuste do tempo de colheita
Indicator Light Area.
Freeze Mode
Modo de congelamento
Freeze mode light is ON when unit is in a Freeze cycle.
Timer On
Timer On light is ON when trigger point temperature is reached in
Temporizador ligado
Freeze or Harvest.
Ice Bridge Thickness Adjustment
Refer to the Ice Thickness Diagram for proper ice
size.
Adjust by pushing the + sign or – sign on the ice
bridge adjustment section of the control panel.
Changing bridge thickness should be a one-time
adjustment as the machine will automatically maintain
that ice thickness.
Harvest Cycle Time Adjustment
After ice has formed in the inverted mold, it must be
released so it can be deposited in the storage bin
section. The harvest cycle is when that occurs, and
must be long enough for the ice to release. While the
harvest cycle length is self adjusting it can also be
manually adjusted if needed.
Proper harvest time is when the ice falls into the
bin and there is about 10 seconds extra harvest
time (pump and fan are off) before the freeze cycle
restarts.
If the harvest time is too short to release the ice,
the time may be increased by pushing the + sign on
the harvest time adjustment section of the control
panel. Operate the machine for another cycle to
confirm that the adjustment was correct. Note that too
much harvest time will slightly decrease making ice
capacity.
July 2013
Page 9