General Data And Electrical Data - LG Art Cool Mirror Inverter Engineering Manual

gEnEral data and ElECtriCal data

Table 2: Unit General Data (Continued)
Type
System (Model)
Piping
Liquid Line (in, oD)
Vapor Line (in, oD)
Condensation Line (oD | ID)
Additional Refrigerant Charge (oz/ft)
Max Pipe Length (ft)
5
Piping Length (no add'l refrigerant, ft)
Max Elevation Difference (ft)
EEV: Electronic Expansion Valve IDU: Indoor Unit oDU: outdoor Unit
Power wiring is field supplied and must comply with the applicable local and national codes.
This unit comes with a dry helium charge.
This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line per indoor unit and a 0 ft level
difference between outdoor and indoor units.
Table 3: 208-230V, 60Hz, 1-Phase Single Zone Art Cool Mirror outdoor Electrical Data Table
nom.
Unit Model nos.
Tons
Art Cool Mirror
LAU090HSV2 3/4
LAU120HSV2 1
LAU180HSV2 1 1/2
LAU240HSV2 2
For component model nos.
Voltage tolerance is ±10%.
Maximum allowable voltage unbalance is 2%.
MCA = Minimum Circuit Ampacity.
14 | ProduCT dATA
LA180HSV2 (LAn180HSV2/LAU180HSV2)
5
Compressor(A)
Compressor Qty
Cool/Heat
1 6.8/7.6
1 6.8/7.6
1 14.6
1 14.6
Maximum overcurrent Protection (MoP) is calculated as follows:
(Largest motor FLA x 2.25) + (Sum of other motor FLA) rounded down
to the nearest standard fuse size.
Due to our policy of continuous product innovation, some specifications may change without notification.
Art Cool Mirror
LA240HSV2 (LAn240HSV2/LAU240HSV2)
3/8
5/8
27/32 | 5/8
0.38
98.4
24.6
49.2
Cooling capacity rating obtained with air entering the indoor coil at 80ºF dry bulb (DB) and 67ºF wet
bulb (WB); and outdoor ambient conditions of 95ºF dry bulb (DB) and 75ºF wet bulb (WB).
Heating capacity rating obtained with air entering the indoor unit at 70ºF dry bulb (DB) and 60ºF wet
bulb (WB); and outdoor ambient conditions of 47ºF dry bulb (DB) and 43ºF wet bulb (WB).
Piping lengths are equivalent.
5
Fan Qty oDU Fan(A)
1 0.45
1 0.45
1 0.75
1 0.75
MCA(A) MoP(A)
10 15
10 15
19 30
19 30