Mute; Call Waiting; Temporary Ringer Silencing - VTech LS6195 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but the
other party cannot hear you.
• During a call, press MUTE on the handset or tap MUTE on
the telephone base. The screen displays Muted until the
mute function is turned off.
• Press MUTE on the handset or tap MUTE on the telephone
base to resume the conversation. The screen briefly displays
Microphone on.

Call waiting

When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if someone calls while you are already on a call.
• Press FLASH on the handset or tap FLASH on the telephone base to put the
current call on hold and take the new call.
• Press FLASH on the handset or tap FLASH on the telephone base at any time
to switch back and forth between calls.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the
handset or the telephone base without disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
• Press OFF or MUTE on the handset, then
Ringer muted displays briefly.
To silence the telephone base ringer:
• Press MUTE or q/VOL- on the telephone base.
The handset and the telephone base ring when there is an incoming call unless the
ringer volume of that device is turned off.
displays and
21
Muted
ECO
ANS ON
Microphone on
ECO
ANS ON
Ringer muted
ECO
ANS ON