Screen Messages - VTech LS6195 User Manual

Appendix

Screen messages

Call log empty
Calling base
Calling HS X
Contact deleted
Directory empty
Directory full
Ended
Failed
HS X is calling
Incoming call
Intercom
Intercom ended
Intercom to
Line in use
Low battery
Microphone on
Muted
New voicemail
No battery
No line
Not available
Number repeated
Out of range or
no pwr at base
Phone
Put in charger
There are no caller ID log entries.
The handset is calling the telephone base (for intercom calls).
The handset is transferring an outside call to the telephone base.
The handset is calling another system handset.
A directory entry is deleted.
There are no directory entries.
The directory is full. You cannot save any new entries unless you delete
some current entries.
You have just ended a call.
The handset fails to register to the telephone base.
Another system handset is calling (for intercom calls).
There is a call coming in.
The system device is on an intercom call.
The intercom call has just ended.
You have started the intercom process, and need to enter the number of
the system deivce you wish to call.
A system device or another telephone on the same line is in use.
The handset battery needs to be recharged.
The mute function is turned off and the other party can hear you.
The microphone is off. The other party cannot hear you.
There are new voicemail messages from your telephone
service provider.
The handset in the telephone base or handset charger has no
battery installed.
There is no telephone line connection.
Someone else is using the directory, caller ID log, or answering system.
The telephone number you have entered is already in the directory.
The telephone base has lost power, or the handset is out of range.
The handset/telephone base is on a call.
The battery is very low. Put the handset in the telephone base for
recharging.
56