Connecting A Vcr - Samsung 650 Series User Manual

Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according
to the instructions on pages
10-11).
Skip step
1 if
you have not yet connected to an antenna or a cable system.
1 Unplug the cable or antenna
from the back of the TV.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
ANT IN terminal on the TV
4 Connect a Video Cable
between the VIDEO OUT
jack on the VCR and the AV
IN (1 or 2) [VIDEO] jack on
the TV
5 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN (1 or 2) [VIDEO] jacks on
the TV
TV Rear Panel
VCR Rear Panel
»
If you have a "mono" (non-stereo) VCR, use a V-connector (not supplied) to hook
up to the right and left audio input jacks of the TV.
If your VCR is stereo, you must connect two cables.
»
Each VCR has a different back panel configuration.
»
When connecting a VCR, match the color of the connection terminal to the cable.
S-Video Connection
TV Rear Panel
m
S·Video Cable (Not supplied)
[!J
Antenna cable (Not supplied)
VCR Rear Panel
('~ol
,----_ _-"0"--_ _ ~
[®_e·2 .~ • ~
rt-t-t-i
3 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN1 [R-AUDIO-L] jacks on the
TV.
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1 To begin, follow steps 1-3
in the previous section to
connect the antenna or cable
to your VCR and your TV.
2 Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the AV
IN 1 [S-VIDEO] jack on the
TV.
[!]
Audio Cable (Not supplied)
An S-Video may be included with your VCR. (If not, check your local electronics store.)
»
Each VCR has a different back panel configuration.
»
When connecting a VCR, match the color of the connection terminal to the cable.