Viewing Closed Captions (On-Screen Text Messages) - Analog - Samsung 650 Series User Manual

Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an
external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital
channels.)
1 Press the MENU button to display the menu.
Press the. or T button to select Setup, then press the ENTER button.
2 Press the. or T button to select Caption, then press the ENTER button.
3 Press the ENTER button to select Caption.
Press the. or T button to select On, then press the ENTER button.
4 Press the. or T button to select Caption Mode, then press the ENTER
button. Press the. or T button to select submenu (CC1-CC4 or Text1-Text4)
you want, then press the ENTER button.
Press the EXIT button to exit.
• The default is Default.
• CC1: The Primary Synchronous Caption Service. These are captions in the primary
language that must be in sync with the sound, preferably matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions.This channel carries data that is intended
to augment information carried in the program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3lText4: Third and Fourth Text Services. These data channels should be used only if
Text1 and Text2 are not sufficient.
.................................
--
.
};o- •
The Caption feature doesn't work in COMPONENT, PC, HDMI(DVI)
modes.
• The availability of captions depends on the program being broadcast.
~
You can also press the CC button on the remote control to select Captions
On or Off.
English -
64