Connecting A Vcr - Samsung CT29M16MQU Owner's Instructions Manual

AA68-03465A-00Eng_XTC
I
N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.
5
Connect another cable
between the other OUT ter-
minal on the splitter and
the A–IN terminal on the
RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
After you've made this connection, set the A/B switch to the "A" position for normal view-
ing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the
A/B switch to "B", you will need to tune your TV to the cable box' s output channel, which is
usually channel 3 or 4.)

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 9-11). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
12
5/7/04 1:30 PM Page 12
All manuals and user guides at all-guides.com
Incoming
Cable
Incoming
Cable
Incoming
Cable
Incoming
Cable or
Antenna
Splitter
Cable Box
Splitter
Cable Box
Splitter
Cable Box
VCR Rear Panel
RF (A/B)
Switch
RF (A/B)
Switch
RF (A/B)
TV Rear
Switch