Resetting The Picture Settings To The Factory Defaults - Samsung 650 Series User Manual

>-
3D glasses (including the Emitter) not manufactured by Samsung, RealD, or ilixco may not be supported.
>-
The 3D glasses and the Emitter must be manufacturer by the same company.
>-
If
you playa game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or
a headache.
Changing the Mode
Provides the function to turn on the 3D Effect. You can choose
between Mode1 and Mode2. To achieve the 3D effect, the 3D glasses shutter back
and forth from the left to right and vice versa (left/right sync).
1 Connect the TV, PC and 3D
IR
Emitter as shown in the figure.
2 Press the
SOURCE
button to select
HDMI3/DVI.
3 Press the
MENU
button to display the menu.
Press the
~
or T button to select
Picture,
then press the
ENTER
button.
4 Press the
~
or T button to select Picture Options then press the ENTER
button.
Press the. or T button to select
3D Effect
then press the
ENTER
button.
5 Presss the
~
or T button to select
Off, Mode1,
or
Mode2,
then press the
ENTER button.
Press the
EXIT
button to exit.
• Off:
Turns the 3D Effect function off.
• Mode1: Mode 1 operates with right sync first.
• Mode2: Mode 2 operates with left sync first.
>-
If
the 3D effect is not working properly, it means the Mode and 3D glasses may
not be syncing properly. To put them in sync, switch to the other mode.
TOOLS
iG=D=Eff=ec=t=========O=ff========;:
I ~
Device List
I
Picture Mode Standard
Sound Mode Custom
Sleep Timer Off
L _
Easy Setting
1 Press the
TOOLS
button on the remote control.
2 Press the
~
or T button to select
3D Effect.
3 Press the
ENTER
button to start the 3D Effect.
Resetting the Picture Settings to the Factory Defaults
~
Move
G'
Enter
{I Exit
1 To select the desired picture mode, follow the
Changing the Picture Standard
instructions numbers 1 and 2. (see page 24)
2 Press the
~
or 'f button to select
Picture Reset,
then press the
ENTER
button.
Press the .... or
~
button to select OK or Cancel then press the ENTER button.
Press the
EXIT
button to exit.
>-
Each mode can be reset.
English -33