Diagnostic Messages - Master Spas LSI 557 Owner's Manual

Master spas portable spa owner's manual
Hide thumbs Also See for LSI 557:
Table of Contents

Advertisement

DOWN EAST (2 -3 PUMP SYSTEM)

Diagnostic Messages

Meaning
Message
No message on display.
Power has been cut off to the spa.
"Overheat" - The spa has shut down.
OHH
On some systems, an alarm may sound.
One of the sensors has detected 118˚F
(approximately 47.8˚C).
OHS
"Overheat" - The spa has shut down.
One of the sensors has detected that the
spa water is 110˚F (approximately
43.3˚C).
"Ice" - potential freeze condition
ICE
detected.
Spa is shut down. The sensor that is
SnA
plugged into the Sensor "A" jack is not
working.
Spa is shut down. The sensor that is
SnB
plugged into the Sensor "B" jack is not
working.
Sensors are out of balance. If this is
SnS
alternating with the temperature, it may
just be a temporary condition. If the
display shows only this message (periodi-
cally blinking), the spa is shut down.
HFL
A substantial difference between the
temperature sensors was detected. This
could indicate a flow problem.
LF
Persistent low flow problems. (Displays
on the fifth occurrence of the "HFL"
message within 24 hours.) Heater is shut
down, but other spa functions continue
to run normally.
America's Leader In Luxury
Action Required
The control panel will be disabled until power
returns. Time of day will be preserved for
30 days with a battery back-up on. EL2000
and EL1000 systems reset the time of day on each
power-up. Spa settings are preserved on all
systems.
DO NOT ENTER THE WATER. Remove the spa
cover and allow water to cool. Once the heater
has cooled, reset by pushing any button. If spa
does not reset, shut off the power to the spa and
call your dealer or service organization.
DO NOT ENTER THE WATER. Remove the spa
cover and allow water to cool. At 107˚F (approx-
imately 41.7˚C), the spa should automatically
reset. If spa does not reset, shut off the power to
the spa and call your dealer or service organiza-
tion.
No action required. The pumps will automatically
activate regardless of spa status.
If the problem persists, contact your dealer or
service organization. (May appear temporarily in
an overheat situation and disappear when the
heater cools.)
If the problem persists, contact your dealer or
service organization. (May appear temporarily in
an overheat situation and disappear when the
heater cools.)
If the problem persists, contact your dealer or
service organization.
Check water level in spa. Refill if necessary.
If the water level is okay, make sure the pumps
have been primed. Check for a dirty filter and
clean if necessary. If problem persists, contact
your dealer or service organization.
Follow action required for "HFL" message.
Heating capacity of the spa will not reset automat-
ically; you may press any button to reset.
47
M A S T E R
S P A S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents