Diagnostic Messages - Master Spas LSI 557 Owner's Manual

MASTER SPA
Diagnostic Messages (cont.)
Meaning
Message
dr
Inadequate water detected in heater.
Inadequate water detected in heater.
dr4
(Displays on third occurrence of "dr"
message.) Spa is shut down.
Pr When your spa is first actuated,
it will go into Priming mode.
--F Temperature unknown.
--C
__
Temperature not current in Economy or
Sleep mode.
Sby
Standby Mode has been activated by
pressing a button combination on the
user panel.
America's Leader In Luxury
Action Required
Check water level in spa. Refill if necessary.
If the water level is okay, make sure the pumps
have been primed. Check for a dirty filter and
clean if necessary. Press any button to reset.
Follow action required for "dr" message. Spa will
not automatically reset; you may press any button
to reset.
The Priming mode will last for up to 4 minutes
and then the spa will begin to heat and maintain
the water temperature in the Standard mode.
After the pump has been running for 2 minutes,
the temperature will be displayed.
Temperature display is current after pump has
been running for at least 2 minutes.
In Economy or Sleep mode, the pump may be off
for hours outside a filter. If you wish to see the
current spa temperature, either switch to
Standard mode or turn Jets 1 on for at least
2 minutes.
Press any button to leave Standby mode and
return to normal operation.
40
M A S T E R S P A S