General - Violectric HPA V90 User Manual

GENERAL INFORMATION
The HPA V90 is a stereophonic headphone amplifier designed to drive
low-, medium- and high-Z loads (16...600 ohms) as usually represented
by high-quality headphones. Due to its specific, variable and low-noise
and distortion circuit design especially optimised for dynamic
headphones, the HPA V90 fulfils even highest demands.
Features:
Unbalanced inputs with gold-plated ALPS cinch connectors
-
- Unbalanced outputs with gold-plated ALPS cinch connectors
PRE-GAIN = switchable input gain in five steps
-
- Independent-channel design
DC-coupled (switchable)
-
- ALPS RK14 volume control
High-Quality op-amps in the signal path
-
High-quality MKP capacitors in the signal path
-
1% metal film resistors throughout the unit
-
- 2 silver-plated Neutrik headphone outputs
Relay-based headphone output cutoff
-
Toroidal transformer
-
Large filtering capacitors in the power supply
-
Switchable ground lift
-
Rugged aluminium case with Nextel coating
-
Solid, laser-engraved aluminium front panel
-
With its small dimensions, the HPA V90 ensures optimum flexibility
combined with high output power. During design, high emphasis was
put on operational safety even when the unit is operated inappropriately.
The HPA V90 is equipped with internal filters to prevent damage to the
connected headphones due to high-frequency overload beyond the
audible range.
9