General - Violectric HPA V280 User Manual

GENERAL INFORMATION
The HPA V280 is a stereophonic headphone amplifier designed to drive
low-, medium- and high-Z loads (16...600 ohms) as usually represented
by high-quality headphones.
V280 contains four amplifiers (2 x stereo) to enable proper driving of
balanced headphones.
Due to its specific, variable and low-noise and distortion circuit design
especially optimised for dynamic headphones, the HPA V280 fulfils
even highest demands.
Features:
Balanced inputs with gold-plated Neutrik XLR connectors
-
Unbalanced inputs with gold-plated ALPS RCA connectors
-
switchable unbalanced outputs with RCA connectors
-
Digital input as an option, coaxial, optical, USB, up to 192 kHz
-
- PRE-GAIN = switchable input gain in five steps
- Independent-channel design
DC-coupled (switchable)
-
ALPS RK27 High-Grade volume control
-
- High-Quality op-amps in the signal path
High-quality MKP capacitors in the signal path
-
0.1 and 1% metal film resistors throughout the unit
-
- 4 with famous V200 technology
- 1 balanced headphone output, Neutrik 4-pin, gold plated
2 silver-plated Neutrik headphone outputs
-
Relay-based headphone output cut-off
-
Dual Toroidal transformer
-
Large filtering capacitors in the power supply
-
Switchable ground lift
-
Rugged aluminium case with Nextel coating
-
Solid, laser-engraved aluminium front panel
-
The HPA V280 is equipped with internal filters to prevent damage to the
connected headphones due to high-frequency overload beyond the
audible range.
10