Connection / Connectors - Violectric HPA V90 User Manual

Unfortunately there is no general recommendation how to solve hum
and jitter problems - or even minimize them. The best way to succeed is
to check different options !!
Electrical safety is always ensured, since the earth conductor is
permanently connected to the enclosure !!
Please note that with jumpers not in the ex-works position
for which the user is responsible only !
Connection / Connectors for Analog Signals
ANALOGE SIGNALE
CINCH/BNC PLUG
HOT
GND
SHIELD
UNBALANCED INCOMING SIGNAL
ANALOGE SIGNALE
zum
Kopfhörer
EMC emission might occur,
Unysmmetrischer Eingang oder Ausgang an unsymmetrisches Kabel
6.3 mm TRS Klinkenstecker ( ip -
8
CINCH/BNC PLUG
HOT
GND
SHIELD
UNBALANCED OUTGOING SIGNAL
T R S
ing - leeve )
Tip = linker Kanal
Ring = rechter Kanal
Sleeve = Masse