General Electrical Safety Instructions - Jacuzzi J-460 Owner's Manual

WARNING: In addition to maintenance of filters and
water chemistry, proper ventilation is recommended to reduce
the risk of exposure to viruses and bacteria that could be pres-
ent in the air or water. Consult a licensed architect or building
contractor to determine your specific needs if installing your
spa indoors.

4.0 General Electrical Safety Instructions

Your new Jacuzzi® spa is equipped with the "state-of-the-art" Sentry™
equipment system. It contains the most advanced safety and self-protec-
tive equipment in the industry. Nonetheless, this spa must be installed
properly to ensure dependable usage. Please contact your local Jacuzzi
dealer or local building department should you have any questions
regarding your installation.
Proper grounding is extremely important. Jacuzzi spas are equipped with
a current collector system. A pressure wire connector is provided on the
surface of the control box, located inside the equipment door (Figure-
B, page 11) to permit connection of a bonding wire between this point
and any ground metal equipment, metal water pipe or conduit within 5
feet (1.5m) of the spa, or copper clad grounding rod buried within 5 feet
(1.5m) of the spa. Bonding wire must be at least No. 8 AWG (8.4 mm
solid copper wire. This is a most important safety assurance feature.
Before installing your spa, check with your local building department to
ensure installation conforms to local building codes.
)
2
Page 9