Brother DCP-J125 User Manual page 127

f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
 If you do not want to change any
settings, press Colour Start to print.
Monochrome
You can convert your photo to monochrome.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Monochrome.
Press OK.
e
Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
 If you do not want to change any
settings, press Colour Start to print.
Printing photos from a memory card or USB Flash memory drive
Sepia
You can convert the colour of your photo to
sepia.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
4
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Sepia.
Press OK.
e
Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f
Do one of the following:
(PHOTO CAPTURE).
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 20.)
 If you do not want to change any
settings, press Colour Start to print.
4
4
17