To Lock The Doors - RAM Truck 2011 Owner's Manual

Chassis cab
Hide thumbs Also See for Truck 2011:
Table of Contents

Advertisement

Security Alarm System activated will cause the alarm to
sound. Press the UNLOCK button to deactivate the
Vehicle Security Alarm System.

To Lock The Doors

Press and release the LOCK button on the RKE transmit-
ter to lock all doors. The turn signal lights will flash and
the horn will chirp to acknowledge the signal.
Sound Horn With Remote Key Lock
This feature will cause the horn to chirp when the doors
are locked with the RKE transmitter. This feature can be
turned on or turned off. To change the current setting,
proceed as follows:
• For vehicles equipped with the EVIC, refer to "Electronic
Vehicle Information Center (EVIC)/Customer-Program-
mable Features (System Setup)" in "Understanding Your
Instrument Panel" for further information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
• For vehicles not equipped with the EVIC, perform the
following procedure:
1. Press the LOCK button on a programmed RKE trans-
mitter for at least four seconds, but no longer than ten
seconds. Then, press the PANIC button while still hold-
ing the LOCK button.
2. Release both buttons at the same time.
3. Test the feature while outside of the vehicle by press-
ing the LOCK button on the RKE transmitter with the
ignition switch in the OFF position and the key removed.
4. Repeat these steps if you want to return this feature to
its previous setting.
2

Advertisement

Table of Contents
loading

Table of Contents